What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 19:28

The third is lightning and “how it gets conducted into a home.”
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
An AC voltage/ current source, and an ac inductive load.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I post the exact comment here.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
I feel like my boyfriend doesn't love me. Why?
Here is a simplified AC power diagram.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What are some dirty secrets of Indian (Bollywood, etc.) actors and actresses?
A circuit breaker is similar, but is resettable.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
The bolt then partially travels down the line to your home.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The other is “what does a “fuse” do?”
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
[image of Common-mode choke]
Do you want to have an XXX chat?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
what exactly is a ‘surge’ protector?
[old diagram got deleted by accident]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This one hit behind the barn.
For this case there are devices called Metal oxide varistors (MOV).
How would you feel if your girlfriend had dick pics on her phone?
This is where the MOV conducts again, and dissipated the energy.
The MOV will conduct when the voltage exceeds 50% of line voltage.
A fuse is a non-resetable over current circuit protector.
Eating green bananas can lower your risk of cancer by over 60% - The Brighter Side of News
Edit 2024–10.
It seems Mohan does not understand the difference between a comment and an Answer.
nine
What is the nastiest thing you had your wife do and she loved it?
but I think this circuit , shows a few more pieces.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is 'the assistant's answer'
First Sentence:
One
At one ohm, the resistor has a maximum of 1 watt power.
What causes you to be tired all the time and major headaches?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
One is “what exactly is in a ‘surge protector’ ? ”
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
Auto-Parts Bankruptcy Is the First Big Casualty of Tariff War - WSJ
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Are you worried that the 2024 US presidential election will result in a close race?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
eight
There are two important concepts here.
There are three different concepts here that are getting confused.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
It also is a device that limits the change in current flow.
Now when you have a certain ac resistance, then a current flows in a loop.
At least they know the answer if they wanted it.
2024–10–14 [Omar Gharbi Omar Gharbi ]
What is lightning?
but this device (an Inductor) … impedes the rapid changes in the current.
He then describes the function of a fuse.
2024–10–16 [ OO OLAOYE OYEBODE ]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
What does a fuse do?
These devices are installed between the “hot” and “neutral” and protective ground.
(Dc diagram shown, AC is similar).
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Upvotes:
Barnstars:
This is where this question deviates from being a 'generic' question, and becomes more specific.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, what happens?
the problem then depends on "how fast does the fuse operate?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
a photo is worth a thousand words.
2024–10–10[John johnson John Johnson ]
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then asserts :
In schematic diagrams this is the symbol for a fuse:
Because the load is inductive, the current lags the voltage.(by a bit).
So, the voltage could go up to 500 volts, and the fuse will not open up.
This device then solves the entire problem.
But… the neutral is now “floating” because of the 1 ohm resistance.
But it can get overloaded, and no longer works.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
He then describes Rainy Season and Lightning.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.